产品中心
深圳市锦昊安科技有限公司是一家专门为恶劣和苛刻环境设计的硬化以太网、PoE和光纤连接产品的制造商。
产品中心
E1-4FE interface Converter JHA-CE1fF4p（Physical lsolation）
-
- Based on self -copyright IC
- Can realize 4Channel Ethernet data transmission by 1 E1 circuits
- Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
- 4Channel Ethernet rate is 1984Kbps, set up the first，second，third channel rate, the fourth channel Ethernet rate automatic allocation
- The local device can forced the remote device rate follow it
- Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
- Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
- The Ethernet interface supports jumbo frames (2036 Bytes)
- Ethernet interface supports10M/100M, half/full duplex auto-Negotiation and AUTO-MDIX (crossed line and straightly connected line self-adaptable )
- Have Ethernet monitor self-reset function, the equipment will not dead
-
产品分类：
PDH/语音多路复用器
接口转换器
以太网到E1转换器
- 产品描述
- 尺寸
- 订单信息
- 下载
- 应用
-
E1-4FE interface Converter JHA-CE1fF4p
（Physical lsolation）
Overview
This interface converter is based on FPGA. Can realize 4Channel Ethernet data transmission over 1E1 circuits，provide users with Ethernet access at the rate of 1984K. It is widely used in finance, securities and security departments which need to be provided two different networks, and both on a physical network can be completely separated. For example, the financial system business network, internal office network and business network can’t be linked together. This interface multiplexer can solve this problem.
Product Photo
Mini type
19inch 1U Type
Features
- Provide 2 clock types: E1 master clock and E1 line clock;
- Have three Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、Command the remote Ethernet interface Loop Back(REM)
- Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
- Realize monitor of remote equipment temperature and voltage from local equipment;
- Support SNMP Network Management;
Parameters
♦ E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
♦ Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
♦ Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
Model Model Number:JHA-CE1fF4p Functional Description 1channel framed E1 – 4FE Physical lsolation Converter Port Description One Fiber interface；4*FE Interface Power Power supply: AC180V ~ 260V；DC –48V；DC +24VPower consumption: ≤10W Dimension Product Size: Mini type 216X140X31mm (WXDXH),1.3KG/piece 19inch 1U type 483X138X44mm (WXDXH),2.0KG/piece -
*注：请准确填写信息，保持通讯畅通。我们将尽快与您联系
相关产品
如果您需要查询我们的产品或价目表，请留言
您给我们的电子邮件，我们将在24小时内与您联系。
