产品中心
深圳市锦昊安科技有限公司是一家专门为恶劣和苛刻环境设计的硬化以太网、PoE和光纤连接产品的制造商。
产品中心
4E1-1FE interface Converter JHA-CE4F1
-
- Based on self -copyright IC
- To achieve Ethernet data transparent transmission in 1-4E1 circuits
- Can realize the local and the remote device reset
- Ethernet Interface is 100BASE-FX, support VLAN protocol
- Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
- Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s
- Support all set of Ethernet Work Mode
- CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch circuit one direction error rate exceeds threshold, cutting off this direction the other direction is not affected; that
- Allow 4Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically stop on the E1 that time delay is too large to send data
- E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
产品分类：
PDH/语音多路复用器
接口转换器
以太网到E1转换器
- 产品描述
- 尺寸
- 订单信息
- 下载
- 应用
-
4E1-1FE interface Converter JHA-CE4F1
Overview
This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize 1~4 E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference.
Product Photo
Mini Type
19 Inch 1U Type
Features
- E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
- Support E1 channel hot-plug in the device, and automatically detects the effective
- channel and will not interrupt data transmission
- Can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available;
Parameters
♦ E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
♦ Ethernet interface(100/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
♦ Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
Model Model Number: JHA-CE4F1 Functional Description 4E1/1FE interface Converter Port Description 4* E1 interface；1 *FE interface Power Power supply: AC180V ~ 260V；DC –48V；DC +24V;AC110VPower consumption: ≤10W Dimension Product Size: 216X140X31mm (WXDXH) Weight 1.3KG Application
Typical solution 1
Typical solution 2
- Previous: 16*E1 to 3x1000Base-TX+2x1000Base-X Interface Converter JHA-CE16G3F2
- Next: 4E1-4FE Interface Converter JHA-CE4F4 (Logical lsolation)
*注：请准确填写信息，保持通讯畅通。我们将尽快与您联系
相关产品
如果您需要查询我们的产品或价目表，请留言
您给我们的电子邮件，我们将在24小时内与您联系。
